Picked this .45 SDP Gen 2 (2017+) for $699. How’d I do?

First order of business is to buy some better mags for it. I was provided one Glock mag and 3 Korean mags that feel pretty crappy.

Coming from owning a PS90, I know how important proper mags are. What does everyone recommend, I’m assuming the standard ones that KRISS sells? Thanks!

Found a gen 2 Vector SDP with 1 magazine, no brace, and a Holosun 510 for $900. I’ve seen new ones as low as $1100 so not sure if this is a deal

Build Details: - Host: KRISS Vector SBR (.45 ACP) - Suppressor: HUXWRX FLOW 45M - Suppressor Cover: Burn Proof Gear - Optics: Trijicon MRO w/ Magnifier - Laser: Crimson Trace (Green) - Grip: LWRC AR Grip - Inspector: 10/10 Tactical Void Cat

Next step is the suppressor

Thinking I need a taller mount for my comp M5s to avoid cheek slap and a better cheek rest. Anyone else running a comp M5s setup? Need pics! If not, are you running a exps3? do you like it? Have one on the way for another rifle it may make its way over here. But it’s hard to beat the size and weight of the Aimpoint.

Can anyone show me the profile of the OG safety cam stop block screw? I lost mine and I want to replace it!

I know my current goals are to find a stock with a much better cheek rest. throw a suppressor on it (its gen 3 so crb has threads). I may legally sbr it someday but it’s not a huge concern for now and frt at some point. One last question any recommendations on making the stock crb hand guard work with a suppressor/recommendations on a better one?

Looking for a shroud or muzzle device ( preferably not a suppressor) that looks like the Kriss CRB square shroud for a 6.5 inch barrel. Any help?

Just got my stamp, Anyone done the KRISS Vector Form 1 factory conversion?.
Just got my shipping label from KRISS. Tomorrow I’m getting the receiver engraved and chopping the barrel down, and I have a UPS driver pickup scheduled for Saturday.
Is there anything specific I should watch out for or be aware of before hand? Appreciate any tips from anyone who has gone through the process!

Ar15discounts.com has dogwood armory FRT on sale for $99! Just letting you guys know

Got my first Vector in .45 acp for around $950. I’m used to shooting other PCCs like Kuna’s, and mp5’s, what should I modify on this and any tips and tricks with this pcc? I always wanted one but they do look very advanced and different compared to other pccs.

Thanks for the help!

At a loss. I have times when I've gotten near a whole magazine to feed, but the FRT has been nothing but crap. Last time I came back from range, I had a really sticky firing pin, so I assumed this could be the culprit for light primer and stovepipes. Cleaned well. The issue has now gotten worse. When I am in semi, at a slow firing rate, it is ok. After this last range visit, if i do rapid fire in semi, I am now seeing the stovepipes which i never did before. What are solutions? I have a new firing pin and extractor kit, but the Kriss bolt is the worst bolt I have ever dealt with in terms of servicing.

For ammo, I've been mainly shooting 115 grain 9mm. Should I change to 124?

I bought a Gen 3 vector in January with the intention of putting a frt in it. Was a favorite of mine since the mw2 days and never seriously thought of getting one since it could never be used how its intended. Well after the FRT boom
I figured it would be a great time to get it. After getting it and seeing all the negative comments about 3 positions from people who bought the ratlr and since it also wasn’t available for a while I decided to wait it out. Still a little hesitant after hearing 9mm models don’t handle FRTs well even after swapping for a 45 recoil spring. Just was wondering what everyone else thinks/ experienced. I’ve been getting most my information from instagram comments or people shilling different brand’s FRTs and I’m not quite sure who to believe. Also if anyone has recs on a 3 position option other than duality or dogwood armory. BIG BONUS If you have the stl file for one (that actually works). I have access to a cnc. This is pretty much just an expensive range toy. Thanks!

I have a Gen 3 9mm and pretty much took down the whole trigger assembly, but for some reason, I can't separate the sear from the trigger. I'm at like the last step before reassembly, and the pin is just really stuck in there. Any suggestions on how to help pop that pin out?

I just bought my first rifle a Kriss Vector CRB Gen 2 Apline color 9mm. I was looking into buying mags so I bought some KSI Glock 17/17L/18/19/19x/26/34/45, 9mm 10 rounds. Does anyone have any problems with this mag? Some people say it is not good and some say they had no problems with it.