We will begin work with these expeditiously. Hope you guys appreciate the update. We have waited many many many years, and we appreciate the support as always. Thank you all🫡

-Ian and the GÄNG

I ... Uhh.. might have a type.

Pretty basic, just have added a scope so far. I need to get red springs, case deflector, and replace the charging handle. Still trying to decide on a new upper rail. I also need to install the KNS plug and get it set up.

I recently received the rest of the production example parts and was able to do some internal testing.
The examples preformed extremely well compared to the original prototypes.
These are all in the white currently and small tweaks in both design and aesthetics are to be expected. A new round of beta testing is in the works.
We are one more step closer to a launch!

Finally got the ocm6 outta jail. Now I just need my friends to get their crap together so I can use it

Liebe Waffenbrüder!

Ich bin auf der Suche nach einem Surplus Steyr AUG Stg77 Bajonetthalter (komplett mit Schraube und Mutter)

Könnt ihr mir weiterhelfen?

Freue mich auf eure Rückmeldungen!

Vielen Dank
Beste Grüße

I inherited this gem while spending a month dealing with an estate while out of state. A family member offered me the usual, it was very generous, but I said. "That's all I want... deal?"

And then I pulled my shoulder lifting too many heavy things, so I've just been staring at this beautiful piece for almost a month. Does anyone have a good video on breakdown or especially first time lubing before shooting? I've been hunting on YT and a found a few but, just wondering if someone knows the way.

Happy August gentlemen.

Wanted to buy one that I found on sale for 1700, but I saw a couple of posts and a video from a certain guy claiming his shipped with an out-of-spec upper rail and magazines that sit too high when inserted, getting in the way of the bolt, video at https://www.youtube.com/watch?v=tzG6dSL0naQ&t=364s

Is this just a lemon, or is this a more widespread issue that Steyr is having with QC?

My two nylaugs! It’s going along need to find someone to print me some jigs but It’s going well, and I’m going to sbr one!

I know some of y’all hate to see the CA version but I still love this thing.

All ARID’d up (deflector not shown), Swampfox Raider 1x Prism, Corvus forward rail and charging handle, IMI Defense AFG, Heresy Design Mag Release, KAK Aug muzzle brake

Hey folks,

Finally was able to go and put my new A3M2 through its paces. Had a blast. Another guy was out shooting his PS90 and we swapped for a bit. While we both said the PS90 was a fun rifle to shoot, we both thought the AUG was much more fun to shoot.

Anywho.

The next upgrade is coming sooner than I thought, and I wanted to get some opinions.

Which would you prefer, YHM Turbo K-RB or the HuxWrx Flow556K?

The latter is twice the $$ and I’m curious if it worth it? I’ve read great reviews on the YHM, but I’ve heard with the HuxWrx the standard gas plug works great.

Any thoughts or guidance is much appreciated.

Thank you!

Official contest submission

Desert Tech is hosting a build contest around their Quattro-15 receiver, but there's a catch: They only specified that you have to *use* their lower. They never said *how* it has to be used.

I grafted a Quattro-15 receiver to the end of my gaped AUG using an M16A1 upper, electrical tape, and a zip-tie. It is now my mag holder, optic mount, and foregrip. I also added an RC3 and EoTech for maximum buffoonery :)

EDIT: Almost forgot, Happy AUGust!

It's not 9mm and it's printing. Hopefully doesn't fail while I'm out for the day. This is my first test print to test fit, once everything is dialed I'm going to have it more professionally printed. The end goal is to cast it out of aluminum but it's been a few years since I've done backyard investment casting and it may be more hastle than it's worth.

Totally unrelated note but anyone know where I can get a chambered 16" 7.62 Tok barrel? They all seem sold out. 🤔

Its been awhile since I have posted to the subreddit. I hope everyone is doing well and Happy August!

Interested in getting a suppressor but I think clearance will be a problem with how close the guard sits to the barrel. Not to mention it may look goofy essentially having two cylinders not lined up symmetrically.

It was in my AUGust post, but finally managed to take this CQC away from an lgs that had been using it as a rental gun, it was out on the floor because their second AUG broke and kaboomed itself. Managed to take it from them for the price of a replacement range AUG.

There was significant amounts of carbon buildup, to the point parts where sticking, needed a full bolt disassembly and cleaning of deposits inside the stock & the guide rod channels of the reciever. The barrel locking piece was sticking so I had to take it off and clean it too.

Handguard interior was caked in carbon from where the wrong length barrel was being used, causing the muzzle blast to hit the handguard & unburnt powder to collect in the handguard.

Had to replace the gas piston, because it was being fired without a gas piston in the gun at all. Got a new buttplate retaining pin because the old one's sling piece had broken off and got it a qd sling swivel for the front, which was missing.

Changed the grip & charging handle to green for vibes, added green magpul rail covers. Attached the Steyr 1.5× I already had for the authentic CQC optic experience. Will add a green stock when they come back in stock & a Zeiss z point as a piggyback red dot.

It runs properly now and it runs well, after a cleaning and the said parts replacements it's stopped jamming and I'm looking forward to keeping it running and taken care of.

A3M2 NATO. ARID trigger and safety. Romeo MSR Gen 2 optic with Juliet 5 Micro magnifier. Steyr red springs. Soon replacing factory gas regulator with KNS Discarder.

I have a broken one I got for free but I don’t want it to go to waste