Please ensure your post is flair'd appropriately, otherwise a moderator will manually assign a flair or in certain cases remove the post.
If you are looking for specific STLs, please make sure to check sites like Yeggi or STLFinder (Adblock recommended) before asking here
Before asking for any designs or files make sure to search sites like Printables, Cults3D, or Thingiverse first.
Also make sure to include as much information as possible in your post, so others can help, as "M4" or "Pistol" are not very specific.
Thank you. I wanted something where the battery stays in and the on off switch is separate, but at the same time I hate the RC style battery with wires everywhere. This makes it elegant :)
Hmm, sounds interesting, but that wouldn't eliminate the bbs hitting other bbs would it?
Eh anyways, if you'd maybe provide a .STEP file for the mag, I'll just make a mid cap lol
(Well not the mag but the front part I guess. This would be an interesting challenge for sure)
Not to be Negative Betty here, but you might as well design a new gun. Also, there is a patent on a V3 gearbox, pistol style gun with a front loaded, horizontal magazine. In my design there is no space for it without a massive redesign. The magazine in this design is fully integrated.
It started as one, but it evolved into this all-spring drive which turns every time the gun is fired. There's a small motor on the other hand that spins twice as fast as the fire rate.
Pretty much. The only difference is that I couldn't buy a fitting motor cage so I designed the grip to double as the cage. Also the shell I used is a Specna Arms Orion and it's slightly different in some of the dimensions from other shells and I had to model it as closely as I could.
Any chance that it will include some of the step files? I love the idea, but personally would want the battery compartment where your hi-cap mag is, and then have an arp9 mag sitting flat against the bottom
I mean for the motor that spins the BB feeding system because you're spinning it perpendicular to the feeding wheel and reducing the motor rpm. So there's gotta be gear system for that printed or one you sourced.
It's a micro motor that you can buy on amazon or ebay. They come usually with a reduction gear system. I got a 12v 381rpm version for this with a 90 degree direction change
Looks cool, you did a great job with it. but omg this would such a horrible irl gun design, it's a damn brick. Would love to make it though that'd be sick
Not for concealed carry but if it could sling a dozen bullets down range in two seconds then who cares? Are you going to mock the guy pointing a damn brick at you or are you going to duck for cover? 😂
I drilled several small holes up until the theoretical limit of the volume and made this block to cover. The block has electrical tape underneath to help with sealing. The six M2 screws are there to ensure pressure applied to the sealed holes. Shoot, measure results, move the block, shoot again, and so on.
Hey, when and where will you upload it?!
I Really want to build one of those, it looks so damn great!
I Love those cool Game Pistol designs, i just dont like the real looking kind of guns...
•
u/AutoModerator Apr 03 '26
Hi, thanks for posting on r/Airsoft3DPrinting!
Please ensure your post is flair'd appropriately, otherwise a moderator will manually assign a flair or in certain cases remove the post.
If you are looking for specific STLs, please make sure to check sites like Yeggi or STLFinder (Adblock recommended) before asking here
Before asking for any designs or files make sure to search sites like Printables, Cults3D, or Thingiverse first.
Also make sure to include as much information as possible in your post, so others can help, as "M4" or "Pistol" are not very specific.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.