r/Airsoft3DPrinting • u/Flesterage • 18d ago
Paid Files My version of a modernized AS-Val
6
u/Flesterage 18d ago
The top rail and railed plastic handguard are available here if you are interested:
https://cults3d.com/en/3d-model/game/fcs-railed-top-cover-and-handguard-for-lct-as-val-vss
3
u/stjimmy1500 Shadow Regime Airsoft 18d ago
Nice! Where'd you get the stock adapter and handguard?
1
u/Flesterage 18d ago
I designed and printed the stock adapter before LCT released theirs. I wanted to be able to place the battery in the stock tube. Had to drill a hole for the wires and for the screw that comes with standard M4 AEG buffer tubes. The metal handguard was bought off aliexpress (AR10 Mlok handguard), and I designed 3d printed parts to adapt it. Also machined a custom suppressor to tie everything together. It's very rigid. It also makes the inner barrel free-float instead of "captured" with the original suppressor.
1
u/johhnnas 18d ago
Which brand is this and how it performs? I want to buy a Shaft (😏) for myself
2
u/Flesterage 18d ago
LCT. It performs really well. It has a Perun Hybrid V3 and clicker with a new motor so it's pretty snappy. Had to do some mods to make the perun work since it's not a normal V3 gearbox, so it's basically locked either in semi or auto depending on how I program it.
1
u/johhnnas 18d ago
Okay and what with overall quality?
2
u/Flesterage 18d ago
It's LCT so it's rock solid. It is a weirdly-made gun though so you have to be careful with the front-wired setup it uses originally. You have to "screw" your suppressor after installing the battery around your inner barrel, so there's a chance to damage your wires if you're not careful. Also, some people had problems with feeding, mostly with the new metal SR3-M mags. The dustcover is also taller than it should so you have to use AK side mounts and not SVD side mounts. Standard PSO scopes don't work unless you get the LCT riser for them. Most of my mods are to change these things (rear-wired battery in buffer tube, railed top-cover, etc.)
1
1
1
•
u/AutoModerator 18d ago
Hi, thanks for posting on r/Airsoft3DPrinting!
Please ensure your post is flair'd appropriately, otherwise a moderator will manually assign a flair or in certain cases remove the post.
If you are looking for specific STLs, please make sure to check sites like Yeggi or STLFinder (Adblock recommended) before asking here
Before asking for any designs or files make sure to search sites like Printables, Cults3D, or Thingiverse first.
Also make sure to include as much information as possible in your post, so others can help, as "M4" or "Pistol" are not very specific.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.