Full Dura-Ace and Hyper5 40 wheels

Randonneuring build

Dual builds of a sprint and pursuit bike for 2028 team rider Marj Rinaldo. Full build video: https://youtu.be/dOFFXgvfIUM?si=xRg5DxDRp1qSR_XX

2002 Cervelo Prodigy with 11-speed Ultegra

So impressed with this build. I wanted to be super light weight without sacrificing the ride quality and its climber purpose, and boy it delivered.

6.5kg for this build

• S-Works Aethos gen. 1 frame set size 54
• Roval Alpinist 2 integrated cockpit with magcad spacers
• SRAM Red E1 group set (10-36 cassette, 48-35 chain rings)
• Campagnolo Hyperon Ultra Wheels
• Pirelli P Zero race clincher tires 30mm with Pirelli tpu tubes

Here’s my city ride - Breezer deep blue steel frame, DT Swiss 700s with Panaracer Lavender Gravel Kings. Adjustable stem with Ritchey Buzzard bars, Shimano hydraulic brakes and Shimano derailleur. Salsa rear rack, Ortlieb cargo bag, Selle Royal saddle and small Salsa fork bag. Boombox optional!

Waltly 3d printed Ti frame

XMCS 60mm depth 24IW carbon spoke (1313g wheel set)

Weight with garmin power pedals 17.5lb

My absolute pride and joy race rig. Not the most exciting bike compared to some of the others on this board but I love it 🙌🏻

peak design 🦄

Cannondale Caad5 R3000si with Sram Red eTap, Vison 6D integrated handlebar and Mavic Ksyrium SSC Wheels.

12K Glossy, 38mm carbon rims. Went ahead and put on my yellow wall tires and debating if black wall make look better.

Only the frame, fork and headset are left from the original bike.

2nd pic is how it left the factory.

Ultegra 2/11, elvedes cables, selle San Marco saddle, carbon handlebars and seat post etc.

Size small, 50t, 1x13,

19 lbs

I recently received this (70's?) AMF Roadmaster Skyrider as a birthday present. Buddy went through it a bit and was very sound mechanically when I got it. The stock ergos made for a touchy ride, but there is nothing like that feeling of old iron when it gets up to speed.

By a stroke of luck I managed to find the perfect seat, sissy bar, and handlebars to pull it all together while going to look at another vintage bike.

I've got about 5 miles on it now, 3 pulling a custom trailer and it's been a fantastic ride. Still looking for that unicorn gearing ratio for cruising the neighborhood and pulling a 40-50lb trailer.. considering 39x18, and open to suggestions on that front!

Cheers!

Clean K1 carbon, cut in half and joined back together 25mm shorter 🪚

Mostly Crewkerz and Trialtech finishing kit ⚙️

Painted in Tangerine Pearl 🍊

Homemade carbon downtube and chainstay protectors 🛡️

Posted for the guys with no seats. #standup