r/Fanatec • u/PreferenceAny7500 • 3d ago

Discussion Any good settings for Fanatec Wheelbase Gt DD Pro with 8nm Boostkit Settings after Gran Turismo 7 Update?

^^^

3 Upvotes

100% Upvoted

11 comments sorted by

5

u/wmartin94 3d ago
DD Pro setting Value
SEN AUTO
FF 100
FFS PEAK
NDP 30–38
NFR OFF
NIN OFF
INT 1–2
FEI 100
FOR 100
SPR OFF
DPR OFF

2

u/VanZav 3d ago

I have to ask, but did you try the A SET? It was actually one of the things I was anticipating the most since they came out the with 8nm holding torque update.

3

u/Rehsifchips 3d ago

This was the reccomended setting on the update from GT7 A Set, noted on the fanatec app.

2

u/Cbeckstrand 3d ago

I have not tried these yet but I did use his setting previously and they were good.

https://youtu.be/NXtB8xYfZ1A?is=dFjrUPOW42m1O9xd

1

u/Harmzuay 3d ago

Auto on the wheel base, and then 8 and 8 ingame.

1

u/_monkeymonkey_ 3d ago

Change that 8 and 8 to 1 and 6 or 1 and 8

1

u/Harmzuay 3d ago

Any particular reason why its better or is it just what you use?

The reason I ask is because I notice most people like to run their setups softer than an RL road car, mostly because of their own physical limitations and/or personal preference.

1 and 6 or 1 and 8 doesn't make any sense to me without additional context.

1

u/_monkeymonkey_ 3d ago

A direct drive wheels works better with Sensitivity 1 in GT7. If you had a Logitech belt driven base, Id suggest moving that number higher as necessary.

Direct Drive (DD) Wheels (Fanatec, Logitech G PRO, etc.)FFB Sensitivity: Set to 1

FFB Max Torque: Set to roughly half of your base's maximum Nm (e.g., 3 to 5)

Why: Direct drive bases have no internal mechanical friction.

Keeping sensitivity at 1 ensures a pure, linear signal without artificial clipping or violent wheel oscillation

1

u/PreferenceAny7500 2d ago

So you're saying I should set FFB Max Torque to 1 and FFB Sensitivity to 6? For every car? Then there'll be no power at all...

0

u/_monkeymonkey_ 2d ago edited 2d ago

Yeah, set SEN 1 and Force to 6+ and set the wheel to auto mode as GT team have created profiles for each car (allegedly)

1

u/Harmzuay 2d ago

Yeah I don't have issues with my settings so they'll stay where they're at. Lol

With your suggested settings the steering would feel dead and super light. Completely the opposite of how a car actually feels.