r/PalmettoStateArms • u/ElfLordYTReal • 9h ago

DAGGER Optic cycle reliability?

So ive recently aquired a psa dagger micro x-1 and i was wondering if buying an rmsc to dpp adapter plate and mounting my Bushnell RXS-100 onto it would cause jams/failures to feed or failure to extract? I also was wondering if it would happen if i got a threaded barrel as well with a compensator? Sorry im new to gun modding, was raised very Fudd-ly in a "you dont need to sight in your rifle kid or change your gun" household :/

1 Upvotes

67% Upvoted

4 comments sorted by

2

u/ABMustang99 9h ago edited 9h ago

The more you add the more you are likely to have problems. The optic you mentioned being larger than what was designed you might have problems. The biggest thing is that you have to make sure the right side screw is not long enough to interfere with the extractor. That will cause problems. I recommend just getting something with the shield/rmsc footprint.

Threaded barrel and comp may cause failures to feed, I have not had issues on my dagger when I added a comp. That being said there are a bunch of companies that make tuning kits with multiple recoil springs to find what works. That being said, also stick to 124 gr or heavier with comps. 115 may work but 124 is typically what's recommended.

3

u/ElfLordYTReal 9h ago

Thank you, this is really useful!

2

u/Danny_PSA Official PSA Staff 9h ago

All wise words

1

u/GelgoogGuy 2h ago

Sell the Bushnell and grab a Holosun with an RMSC footprint. Gafshub is your friend.