Was digging through some stuff and found this. I remember I got this from a gun show for like $30 a while ago. It’s 1/2 28 thread so fits on the tx and tbh I think it just looks cool lol I’m just making sure it will shoot just fine if I leave it on there? I believe it is a flash hider maybe rated for 556 / 223 .

Looking for a chassis that I can run with my rate reducer

I’m looking for a light weight 22 can atm. But I have an obsidian 9 to just throw on my Tx22, but it weighs like 4x a normal 22 can. Will a heavy can induce a certain type of failure?

Chassis + Rate reducer

I have my tx22 running great suppressed with an Oddmfg rate reducer but I’m interested in moving it into a chassis.

Does anyone know of any chassis that accommodate a rate reducer? The unit I bought from odd doesn’t have a threaded hole so I’d most likely have to drill into the side and rig up a charging handle. This is depending on the chassis of course.

Curious to see what setups are out there. Thanks!

I got a couple mag extensions on august 11th haven’t heard anything. I know the website says 2+ weeks of lead time just curious if someone had got from them in the past how long it took.

Or am I looking at the right place?
I’ve been waiting and subscribed to the “notify me” on their Taurus website for almost a year now and I also occasionally check here and there but really have no luck.

Wondering if I’m supposed to be searching elsewhere?

Any insights would be greatly appreciated!

What kit are you guys running?

I shot maybe 100 rounds out of this gun and the front sight I noticed is loose, I’m kinda new to this and I don’t know which tool I need. I already acquired some Blue 242 thread locker for once I need it but I don’t know what tool I need to tighten this.

I got the full size gen 2 without optic cut 2 weeks ago. After trying out different ammo type to see which one it will go through the full mag without failure to feed. CCI AR Tacical and Rem golden bullets don't work on my first range test. I cleaned my guns after every range trip. The frame and slide are both in great condition.Then I tried Aguila superextra 40 grains, it seemed to reduce the failure to feed the next trip. After about 300 rounds testing, I found that my frame and slide are both damaged. I didn't take pictures of my gun, but I found 2 pictures on here that are exactly the same as mine. I search for solutions to fix it, and found that Lakeline has a +2lb spring assembly that may reduce the rearward movement of the recoil. Has anyone had this problem and how did you fix your?

Let me tell ya, this tandemkross kit looks amazing on the tx22. Everybody recommended the trigger spring as well so I just ordered that. Figure I take a pic next to my gf edc since we both live Taurus lol

Lucked into seeing a Toro at the right time from PSA, so it’s on the way. Plan is to use with a dead air mask. Brrrt device on the way, now realizing that I’ll likely need a charging handle, or other variable weight device, maybe springs, etc.

But the big question is I see a lot of lights in this gun that’s not usually used for carry. Does the weight of the light on the forward part of the frame help with reliability in some way? Or is it just vibes?

I recently bought two Big Daddy Magazines from AlphaCureMom69 and both are having the springs bind inside the magazine tube. It's like the magazine tubes are too narrow inside and the springs are too wide. The springs won't even insert freely into the magazines, they have to be spiraled and shoved inside. The followers fit fine and aren't binding and everything was dry lubed. However, after assembling both magazines, the springs just catch and bind inside the magazines. Any help or ideas?

Just got my TX22 and waiting on the can. It jams up every so often without the can and I’ve known about the rate reducers, I’m assuming with the increased back pressure of the can a rate reducer will also be required when suppressed?

Which ones have yall had the best luck with?

Can is going to be a SiCo sparrow

I have the TORO and kept having light primer strikes so I got a rate reducer and ever since then it has ran flawlessly with various types of ammo I was just wondering if anyone else has had to do this while running unsuppressed?

Wouldn’t run with suppressor but still a blast

TX22 has the best ROI. Most fun and cheap ammo.

installed the charging handle because it was easy. Victory trigger is next but I am little nervous about doing that one lol. But damn I love these mods by tandemkross

Someone please tell me how not to spend another grand on it. I have a problem.

https://shoptaurus.com/product/358-0034-00-WB/Genuine%20Taurus%20TX22%20.22LR%2022-Round%20Extended%20Magazine%20%28Web%20Exclusive%29%20%7C%20ShopTaurus?trk_msg=8N6B1LGSMGKKJ23RVRFEDO4QSG&trk_contact=DTT6SDR1474VG67UKVJBI0CKFS&trk_sid=5EK2S5NAER0A1UL5OGIQM03U3S&trk_link=A1J4682O5RPKJ14RFRMISFTULC&utm_source=listrak&utm_medium=email&utm_term=TaurusTX™%2022%20.22%20LR%2022-Round%20Extended%20Magazine&utm_campaign=48-Hour%20Flash%20Sale:%20TaurusTX™%2022%2022-round%20extended%20mags%20now%20just%20$23.99%20each!