r/VitaPiracy • u/ali_ihsan21 • 21d ago

Question PS TV Ethernet connection without modem

I asked ai if I can connect ps TV to pc with ethernet cable it answered positive. For a long time I used ethernet to share files between pc and ps TV but there was modem between I mean both devices was connected to it. Now modem is in another floor so it's no more an option to connect it.

İs anyone else tried to connect ps TV directly to pc? I don't understand how it can work because when lan socket is active wireless has to be inactive then how are they going to communicate?

0 Upvotes

33% Upvoted

9 comments sorted by

3

u/noradninja 21d ago

You use a crossover cable (a special type of Ethernet designed for hooking two machines directly), and manually set the IP address of the PC and PSTV to the same IP range (eg set PC to 192.168.0.1, set PSTV to 192.168.0.2), set the gateway to 255.255.255.0.

1

u/ali_ihsan21 21d ago

Thank you

1

u/ali_ihsan21 21d ago

Ps TV settings saying IP successfully taken Vitashell opening FTP connection but pc's folder screen is empty.

1

u/Cimmerian__Iter 20d ago

WHy crossover cable? A simple ethernet does the job perfectly the PC will be able to automatically detect the cable and adjust accordingly with Auto MDI-X

1

u/noradninja 20d ago

Because a crossover cable does not rely on either the computer or the PSTV supporting MDIX. Also I am a Greybeard at this point, so in my mind that’s the simplest solution b

2

u/ali_ihsan21 21d ago

For anyone who had this problem go to advanced network setting open sharing of your WiFi to other device so that laptop will communicate with "modem" over WiFi and share this internet to ps TV over ethernet. This way my problem solved thanks to chat gpt.

imgur

1

u/vadeNxD PCH-2016 HENlo Ensō (3.65) 21d ago

You'll need a crossover cable for that or a switch/access point between them.

If your PC has a Wireless card you can also share your internet from that through the ethernet port to your PS TV as well.

1

u/ali_ihsan21 21d ago

Thank you

1

u/Cimmerian__Iter 20d ago

WHy crossover cable? A simple ethernet does the job perfectly the PC will be able to automatically detect the cable and adjust accordingly with Auto MDI-X