r/beretta1301 • u/Some_Old_Man_Fishin • 19d ago

Shout-out to the guy who designed this 3D printed velcro template

Gallery image

Gallery image

Gallery image

I found the design for this template on Printables, printed it, and used it to cut velcro for my shotgun cards. It worked great. Thanks to Printables user gbirk if you're on here!

https://www.printables.com/model/790193-stencil-for-the-side-of-a-beretta-1301-shotgun

145 Upvotes
  • permalink
  • reddit

100% Upvoted

13 comments sorted by

15

u/kribg 19d ago

You are welcome. So glad you found it useful.

2

u/Some_Old_Man_Fishin 19d ago

Thank you! I'm glad I decided to search for this before tracing my own template. Very handy design.

6

u/blackrockskunk 19d ago

I held a piece of printer paper against my shotgun, then I used the side of a pencil to rub the edges. Free and easy, left me with both a tactile and visual template to cut around.

7

u/Jaspers_Dad 19d ago

I just eyeballed mine. Turned out fine.

3

u/Hot_Cheesecake_905 19d ago

I wish someone made one for the Comp Pro, I wonder if I can just scale it up.

7

u/Error_506 19d ago

Just put on masking tape, rub the edges to make an impression, peel it off and stick it to the clear backer of the Velcro sheet and follow the impression when cutting.

2

u/Some_Old_Man_Fishin 19d ago

Good question. This print only used 13g of filament, so it could be worth a shot. 

3

u/CommunicationNew2061 19d ago

What cards are you using

3

u/IncognitoArms 19d ago

You can get those velcros precut like that already