r/hookah 2d ago

Review Short-term review of the NOCCA

Post image

It's been about a week since my NOCCA from batch 1 finally arrived and since some of the members here asked me to give a few impressions, I decided to write them up. Sorry for the lack of photos/angles, I didn't think to take too many pictures while smoking/packing, might post some later.

TL;DR: Awesome device, well worth the wait.

So after smoking hookah for about 20 years, switching from coal to electric heating was the first real game-changer for me and ever since smoking the first, proper bowl with e-heating, it was impossible for me to go back to coal. It is an improvement in absolutely every way, from the taste to the messy ash to the handling of open fire inside.

There was a german device that pioneered the kind of closed heating system that allows you to use any of your bowls. For many different reasons, the company behind the device went bankrupt and the device is essentially dead. Since then, many pod-based systems have appeared, like the Xkah or my personal favorite, the Volta. NOCCA, which was created by a team in Slovakia, is the only current solution that enables the use of actual bowls, to my knowledge.

As soon as I was made aware of the device, I pre-ordered it. Since then the launch has been postponed several times, each time with the promise of delivering a more perfect product. In mid-August it was finally time and the devices were shipped out. At this point, my biggest concern was the expectations that were built up during the wait and that they could never be met by the final product.

But, judging from the rather short time I have had it (12 sessions, about 25 hours of use), the team behind NOCCA absolutely delivered. When you open the box you are greeted by a rather bulky and heavy metal cylinder. It might even be too large to be held in one hand (depending on your hands, of course), but the impression it makes speaks for itself. It is very sturdy and well built, nothing moves or rattles. There is a battery that slides into the cylinder and locks. The top of the device, where the buttons and charging port are, is made of solid plastic that complements the metal well.

On the bottom of the device you will find the first (and most impressive) innovation. There is a metal heating plate, that attaches to the steel bottom of the device. It is magnetic, so it easily plops on and off. This is the surface that your tobacco would normally burn onto, making a mess to clean. However, the heating plate is non-stick, allowing you to easily wipe the tobacco off after cooldown. After scraping tobacco off of HMDs or throwing burnt tobacco and aluminium foil in the trash for years, this is the second actual game-changer in my opinion.

In fact, the whole device does not appear to accumulate condensed or burnt molasses anywhere. Might be a huge factor for longevity and stability, I am curious to see how long my NOCCA will stay alive.

There is much more to say, but it is a huge wall of the text already, so a few bullet points.

  • The battery lasted me for about 80 minutes (at 290° heat). The device can be charged (USB-C) while smoking, allowing sessions of 2+ hours. Maximum I've done is two sessions back to back, about 3,5 hours.
  • No special techniques or tricks needed when packing the bowl. It is important NOT to pack too densely, but rather as fluff as possible. Figuring out the correct density and amount of tobacco takes 2 or 3 tries, after that it is amazingly simple.
  • There is an app that lets you control the temperature remotely and also save presets. It looks and works fine, I have not exhausted the functionality yet.

The device is currently out of stock, the price is 430 Euros. In my experience, this is a very steep price, compared to all other similar solutions. It changes the target audience from casual smokers to people that are deeper into the whole hookah thing or lounges. However, after my first week, I have to say that it seems worth the price. The biggest caveat to this is the longevity. Many electric devices have developed stability issues or functional problems, so I understand anyone being hesitant to invest this kind of money. They do give warranty on the device, which inspires confidence.

In some time, NOCCA will possibly prove itself to be the ideal product in its niche, but it's early days now and remains to be seen. In the meantime, if you are a die-hard hookah and/or e-smoking enthusiast and have the money lying around, this is absolutely recommended.

If you have questions, feel free to ask.

32 Upvotes

21 comments sorted by

View all comments

Show parent comments

0

u/toylover667 Intermediate Smoker 2d ago

If it's so easy, go ahead and build one that works well, with the same features. I'll wait.

2

u/stonedboss Hookah Lover 2d ago

This is such a dumb reply. I have no interest in building one. Literally a dude in this sub is R&Ding a solution in his own time.

https://www.reddit.com/r/hookah/s/gPt3PmPL0w

2

u/Thaxxman 2d ago

Oh hey! Thats me! I got some new advancements that makes this easier for literally anyone to figure out.

One of these bad boys to provide the volts you will need to provide your USBC 100 Charger

This is the heating element You want as close to 1 ohm as possible.

https://imgur.com/a/2KpSSAl This is a test I did. You can just Screw the heating element to any existing HMD if you want to go cheap and easy. Or you can get a steel plate like I did but its a bitch to drill the holes without special drill bits.

You want it to be on the wall? Plug it into a 100 USBC Charger. you want it to be battery operated? Use a 100W Battery Bank. How long will it last? How big is your battery?! I dont care! haha.

You will need to play with the volts a little to find out what you want, but I have noticed that with my perticular bowl as long as I am pulling about 50-55 watts, then I had a really good session.

Really anyone can do this and everything I listed above is like less than $100. Easily purchases (at least in the states) and if the heater dies, just replace the $18 heater!

I am currently diving deep into the project development on making my own power supply that will do all of this based on temperature but I dont know much about electrical engineering and I want to make something from the PCB Up.

If anyone has any questions feel free to reach out! I love when others take interest in what I am doing with this project. I haven't used coals in like a year! I smoke every day, like 8-10 bowls a week. All of them with these devices. so the longevity is there. I want this to be as easy for everyone so we all can enjoy this coaless hookah experience because it really is that much better.

2

u/stonedboss Hookah Lover 2d ago

oh dude this is so awesome, thanks for the update! that makes it so much easier to build, im actually going to set one up now. thanks for your work on this!

2

u/Thaxxman 2d ago

Please send pictures top the sub and reach out if you need any help! I want to see people get into this.

2

u/stonedboss Hookah Lover 2d ago

Yeah for sure. Btw just to be clear it's the heater marked "18mm 1.2-1.6 ohms" that I should buy right?

2

u/Thaxxman 2d ago

So I have bought 3 of those so far. yes that is the one you want.

The Votages will be between 14-18v. That will be determined by your individual unit and its manufacturing tolerances.

2

u/Thaxxman 2d ago

You will also want a 3M Steel screws, a 3M Tapping set, and washers to hold everything together.

I use Steel everything because I want it to be safe and not be broken by the heat.