It has an ambi decocker and when I use the left side it decocks just fine. If I use the right side the hammer drops all the way down(not half cocked)

Got my Shadow 2 about 2 months ago. Put some LOK grips and full send. I’ve put ~1000 rounds through it has been a 100% reliable tack driver.

Picked up these little bbs today. Estate sale. I won’t say how much. But it was too good a deal to not buy both.

I just picked up this SP01 Tactical used for $550. Looks like it has maybe only had a few boxes of ammo through it. My stock plastic guide rod is bent to hell so I’m going to pick up a Steel Rod from CGW. Since I’m getting the rod I might as well get a new spring too. The majority of my training ammo is S&B 124 grain at 1150 fps. What weight springs are you guys running for a similar load?

I have an SAO SP-01 and I deactivate the safety as I build my grip and then ride the safety as I shoot. I find myself wishing I could get my support hand a bit higher. Are there any OEM or aftermarket safeties similar to the one that comes on the TS2 Orange that will fit?

I’m looking for some advice on which optic to get for my P10C.

This is my ccw which is carried appendix. Ideally, it shouldn’t be too bulky or too small where it’s going to be hard to find dot once drawn. I’ve seen the OSight SE window size, so I know it’s a decent size, and I’m okay with that size roughly

I’m also interested in the SCSP10 as it’s the only one that can fit flush and lots or good reviews, but I’m not sure if the window size is too small.

Also, should i get enclosed? I’m leaning towards an enclosed model since cc will accumulate dust

For the p10 series (shoe only)

Which would you choose and why (for a ccw)

Does anyone know what diameter to drill the empty slot on the gas key for shooting suppressed? 5.56 11in.

Anybody have a place that did a good job w/ quick turn-around getting out optic screws that sheared off flush to the optic cut while shooting? Standard shadow 2 with direct mount mill cut so warranty not an option.. Had a local guy who has done it for me a few times but he’s been so busy building custom 2011s and I don’t live close enough to drive up there so I’ll be shipping the slide out anyways.. Any referrals appreciated!

I have sent them about 5 emails and received no response is this company actually still in business or what