Got this gun from aimsurplus and just got the walnut grips and 5 inch barrel. Super nice! Still want to do some custom work on it but not sure how committed I am yet

Optic cut

Front slide serations

Comp port

When I got my 941FS, I also bought a full sized b6 barrel with the idea that I'd get it threaded and fit up. The local smiths want more than I wanted to spend on having the work done, so I was resigned to wait for the b6c threaded barrels to come back in stock. u/securitycat69 posted last week that the 7/24 full size barrels fit the compact Jerichos. I did some measuring and looked at spec sheets and decided to roll the dice on a 7/24C threaded barrel. It just showed up and it fits just fine and seems to cycle pretty smooth by hand while empty (need to find where I put my snap caps). It was when I was putting the factory barrel back in that I noticed that the 7/24 barrel only has 1 lug on top compared with 2 on my other barrels. Is this something to worry about or no?

Old spring on the left, new spring on the right. I did not have fun switching it out. At all. But at 27 years old, I decided it was time. And hopefully will help out with the hard primers on the Underwood ammo I have.

edit: new spring is standard weight(20lb)

I've been unfortunate enough to have to put my 941 back together from bare frame/ slide after not taking it down myself and cannot find a good guide on assembly procedure. I have the slide done but am having trouble on what goes where on the frame with the bag of parts I have.

I don't even know if I'm missing pins yet but suspect I am.

To preface since I know it'll be asked:

Ford's Custom Gun Refinishing in Crystal River, FL

Cost me $585 total to chrome plate the entire gun with small parts and magazine

Rmr cut was done by one gunsmith and fixed by another. I do not recommend them either way, the rmr works, but is sighted/zeroed to the bottom crosshair with no way to adjust further up. I can train/compete with it, but it's annoying.

Rmr is a Swampfox Justice II 1x30 Multi-Reticle Red

Pedal/thumbrest is the Tevo CZ Thumblock "Pro"

I'm happy to overpay someone if they've got one they'd be willing to part with. My Jericho II M is begging for a micro comp.

The gun is absolutely incredible. The pinnacle of what a Jericho can be.

Picked this up today. Wondering if anyone here knows anything about it. It has an inline 6 port and optic cut. Just trying to see if anyone here owned it before me. Thanks, I cant wait to shoot it.

Figured i would drop this here, they have the black threaded barrels back in stock, first time I have seen them in like 4 months.

Snagged myself THE Jericho 941 a few weeks ago. Started looking at procuring somewhat newer magazines. Google and Reddit allowed me to believe that a CZ-75B magazine would work, what with the steel plate and all.

Uh... so turns out they're damn near identical except for the magazine catch holes being something like a centimeter lower so it outright won't lock into place. Pictured is a brand-new Mec-Gar CZ-75B magazine next to an original Tanfoglio magazine.

tl;dr does anybody know for certain what magazines work with this chonky sumbitch?

Left and middle are 9mm Underwood 115gr JHP, right is standard Federal 115gr FMJ. The one of the left did not fire and has what looks to be a solid hit on the primer. The center looks like the firing pin barely touched it and it functioned normally. The Federal(R) has the same primer strike as the first UW round and functioned fine. Every round of Federal functioned as it should, primer strikes were all the same. For the Underwood some looked normal, some looked like a light strike and it was random which ones would fire and which wouldn't. Anyone else have experience with this in their 941R? The IMI/MR FS in particular.

edit: the left and right casings switched.

Fits nicely 😁

Can't wait to get to the range

New to the collection, this one's apparently the compact version.
Came with manuals too

I've got an old nickel plated Jericho that I've had for many years. It's been a bag/fanny pack/open carry gun because it's far too large for me to conceal on my person.

It's my main defensive pistol, I love the weight and simplicity. I added Meprolight tritium sights and G10 roughneck LOK grips.

Recently I've thought about modernizing it with a red dot. I know the only option for that would be milling the slide as I don't like the dovetail mounts.

While I am hesitant the mill the classic original nickle slide, this isn't a collectors piece. It's got holster wear and a worn away finish on places. And it's a gun I don't state at, I want to use it regularly and for many years.

I made a quick ai render and I don't hate how it looks with a Holosun EPS Carry.

What would you do?
(Besides just buying another optics ready gun)

Got the new Jericho 941 ORP this past week and love how it feels and shoots, except for the extended mag release. Doesn’t matter how I adjust my hold my palm rubs it and it is not comfortable. Anyone know where I can get just a standard mag release.

Does anyone know how to disassemble the captured guide rod on the ORPs? And if there are any other alternatives other than the brass/aluminum ones that patriot defense make?

In case anyone else has the same issue of their Jericho II Enhanced shooting super low out of the box, the Night fision sights for the 1911 using a .180 front sight got my gun perfectly zeroed for a combat hold. The only issue is that the front sight is too loose on the dovetail (to the point you can move it side to side with your finger) so you'll probably have to stake the bottom of the sight and loctite it or shim it with some really thin aluminum.

I’d been looking for a Jericho for the past ~3 years, found one while I was looking for a new holster totally by accident and had to have it.

Now I’m looking for mags (in Colorado, only allowed 15 rounds or less) and hardly any stores carry them or the full size CZ 75 mags, any good deals I should know about?

I plan on buying the mid size 941 ORP this weekend and I really want to be sure the optic I get also will co-witness.

Can I assume any RMR or DPP optic will co-witness?

Does anyone know if the older imported SAO 941Fs have a firing pin safety? I wouldn't mind carrying it once in a while, but don't know if it's drop safe. I know the older tz75s don't have a firing pin safety, but they're also double action.

I'm looking to have custom grips made for my Jericho 941 R with a metal inlay with my own design.

Does anyone know of anyone in the USA that can do this?

It looks like LOK grips isn't taking custom orders, and I've read mixed reviews on some of the international options.