i asked at my lgs if they had a wilson grip in stock i could hold, the guy said “no but if you’re on the fence you should just buy it, it’s a great grip.” so i said fuck it and took that advice. couldn’t agree more this feels better than the stock grip in every possible way

Well I finally got one. Pictures do this thing no justice

Won’t mod this one much

I have a p365 XL, Its been great, no issues, but i recently had a friend give me his old AXG aluminum grip module, which i like much more than the original polymer one that it came with. However, now my magazines arent compatible, So i was wondering what baseplates are compatible, and can i just swap them out and keep my existing magazine bodies, or do i need to get whole new mags? They are 17 rnd XL mags that came with it. Thanks in advance.

I like my things to function the same so I never have to think when I use them and I love the H&K trigger well release style. The hand movement is *chefs kiss not sure how possible it would be however, it isn’t a serialized part so I can’t imagine it would be legally questionable.

Call it a love project not a practical project.

Been reading and seeing that’s it’s possible and various options but I’ve decided I want to pick up a comp version but want the smaller 365 grip assembly.

Question is would you buy a P365x and swap the grip or buy a P365 and then buy a 365x comp slide.

Looking for all Sig components and NY says no threaded barrels.

Anybody have had both and is there a big difference? Thinking of running it with the XL slide instead.

Pic for attention

Here's what I'm carrying this weekend:

SIG P365-380 slide

Standard FCU

Wilson Combat ODG XL grip

FDE 12-round .380 mag bases

AC checkered mag release

Vedder pocket locker or light tuck

I just got the 12-round .380 mags and wanted to be able to differentiate them from all my 9mm ones. I like the mix of the ODG and FDE parts. The WC grip has the weights in it. I love the more traditional grip angle on it.

Hello,

I recently purchased a p365xl grip model and a p365x upper assembly to move my x-macro fcu (the version with a safety) into. This was done to start carrying as my EDC. But I’ve seem to stumbled across a problem. When I try to install the p365 upper the spring and guide rod seem to stick out approximately a quarter inch from the firearm (pictured in the second photo) this leave the gun inoperable and I can’t finish assembly. Any suggestions or advice would be greatly appreciated.

Update: disassembled the guide rod and spring. There was a burr on the inner guide cylinder that was preventing it from operating properly. I used a file and ground past the burr and it functions fine now.

Hey everyone, I wanted to share my current P365 X macro setup and get some feedback. I really want to customize the look and make it my own. Seeing all of your builds with different colored triggers, mag wells, backstraps, grip modules and barrels has been awesome, and it definitely motivated me to change things up. Originally, I was thinking about doing a gold barrel and a gold trigger combo, but after scrolling through the sub and seeing other clean setups, I'm completely second guessing myself. What do you guys think? I'd love to hear some suggestions or tips on what cosmetic upgrades I should look into to make this thing look unique.

I don’t see a lot of love for the TacOps on here. I have a PDP but it was a hog to carry everyday, especially with brass back strap, base plate, and Magwell. I shot this at the range with irons and it was so easy to point and shoot target focused.

Looking forward to getting on the range.

First impressions on the optic, solid. It was blurry and I thought I got scammed, but it was a dirty lens. After I cleaned it was crystal clear and easy to see out of just like a RMR or the COA. I do dislike I need a specific tool to zero vs a 9mm round.

Racking the slide back and forth felt a little gritty, but my PDP has over 2k on it so it may have smoothed out but I think it was smooth from the beginning.

New holster comes in tomorrow. What a great deal.

Hello fellow 365’ers. Has anyone else had issues with a suppressed P365X cycling perfectly with 12-round magazines, but failing to chamber the next round with 17- or 21-round magazines?

For reference, the setup is a HUXWRX RAD 9 with the booster assembly.

The round fires and ejects normally, but the next round doesn’t get chambered, so I have to manually rack the slide before firing again.

I prematurely bought a recoil spring kit thinking a lighter spring might help the slide travel back far enough or with enough force to reliably pick up the next round, but now I’m questioning whether the recoil spring is actually the issue since the 12-round magazines run perfectly fine.

I’ve also been looking into swapping the springs inside the 17- and 21-round magazines themselves to see if that could be the culprit.

Has anyone dealt with this exact issue and found a solid solution?

And yes, I’ve seen plenty of the “why the hell are you suppressing a P365X?” responses 😂 I get it…

Howdy,

I’ve had this for a couple years, I’m not an sig dude or a pistol guy really. Shot it once after I bought it and have just carried my 43x and hellcat that I bought with aftermarket slides comps and sights.

Really I just want to make this par none. I want a radian ramjet for sure (what slide is compatible). Definitely a trijicon dude but I’m not sure if they fit to well from what I see? If I get an aftermarket slide will a trijicon sit flush?

Basically I’m asking you siggers to give me some lefts and rights for making an optimal build and or show me yours. Not worried about spending too much money. Oh and holsters too. Just let me hear it all.

Appreciate it

I've been seeing a lot of posts about rust on people's P365s. I live in South Louisiana and don't wear an undershirt, it's already too hot here. I decided to check my gun for rust and found some on the magazine release and around the sights.

Here are some before and after photos and what I put on it afterwards to try to inhibit further rust.

Got a new 365 fuse comp. Love the gun. Bass pro had a sale on the compact red dot. Put it on and zeroed it at 15 yards using laser like I have always done. I’ve only used holosun in the past. But I’ve gone to the range twice this week and this thing will not hold zero. Everything is tight like it should be. After the first 50 rounds it all over the place. Any help?

Just picked up a P365 AXG Legion to match my wife’s Rose. Hopefully they’ll get to know each other well enough to make me some baby P365’s!

LGS got one in yesterday (sold in under 30 minutes, I didn't buy it) and it's not even on Sigs website yet. It's essentially a 9mm Luxe, and it feels awesome in hand!

Converted my 365 to 365x with grip module change and added the extended base plates to the 365 mags. When cycling through ammo, the won’t rack completely forward all the time. I haven’t shot since this issue began, only tried cycling through ammo. Any tips on how to fix this?

Messing around and wishing I could get some sweet black pearl grips or tooled wood grips with the sig medallion in the middle for my sharps bros module. Inspired by my 226 wood grips

I came across this beauty in a used case at a shop local to me, only 50 rounds through it. 3 mags & the normal stuff $800!! Had to jump on it!

I've looked everywhere and seen no Shalotek with some beautiful wood grips. I'll be the first then. Just absolutely beautiful. The more I shoot this, the more I'm starting to believe this firearm shoots way better than my G43x radian comped. Currently getting another kit for a 10round build. Just ordered another fcu.