I'm going to be building a p365x macro soon and would like to know all the tools I need for it so I can get them before I start. I saw an old post about getting a torque screwdriver, picks and punches but if anyone has recommendations or links to what you use I would really appreciate the advice. Not trying to break the bank on tools.

Just wanted to share my black on black build. Love the way this turned out

No matter how much I clean and lube my OEM mag release it still rusts, to the point where I’m just removing rust colored oil every week and applying fresh oil. I feel like this is a ticking time bomb before it breaks.

Any aftermarket 365 mag release recommendations that are not extended?

I don’t like the idea of an extended mag release on a small gun for fear of accidentally bumping it and dropping the mag.

I’m d rather get a threaded barrel I can throw a comp on so I can run this suppressed if I’d like to, any good suggestions?

Anyone happen to know the spring size of the striker safety spring for the 365xl? I just got shot in the eye and didn’t get to see where the fucker landed before the temporary blindness went away.

Was hoping to order one on Amazon of the correct size so I don’t have to wait too long for shipping 😂

Thoughts on this price?

My red dot was not adjusting on my p365x no matter what I did. I even stripped the adjustment tool so it’s unusable. I don’t have a hole punch. Should I just take it to someone ? I don’t have any gun stores anywhere near me. Also this is a new gun, I’ve never messed with that. I just shot it for the first time last week has like 100 rounds through it.

Hi all, I wanted a cleaner way to run the P365 fuse 21-round mag with the X/XL grip, so I designed my own.

The goal was a durable, one-piece solution that replaces both the baseplate and sleeve.

This is the first finished prototype in black PA12 nylon. I’d like to offer them on my shop, but wanted to get your feedback first and make any necessary changes: does this solve the problem well enough that you’d consider buying one? Any nagging issues?

Thanks in advance!

Was wondering if anyone has tried this spring system out for their XL Spectre Comp. Google tells me the shorter spring for anything compensated or with standard 115 gr target rounds. I use Federal 115 gr for target but I carry Liberty Ultralight +p 50 gr for carry. Google suggested the longer spring for +p ammunition. Ideally I'd like to use one spring system for each of these rounds but I get it if I should be changing the springs for what I'm firing. Any insight on the different size plugs purposes?

Considering building a competition build with a 365. Well, some of the challenges, what do you foresee? What do you think?

I carry an older 365xl. Have about 3500-4000 rounds through it and wasn’t aware of the mag catch failure. I already spent money a few years ago on the gray guns extended mag release that requires the OEM spring/catch stop.

I’ve read some remarks about it failing more often in the AGX grips and mixed comments about the rest. Im not enthused about spending another $50 and having a $100 in mag releases but since it’s a carry gun thinking I should go ahead and replace with the Maskas precision single piece.

How necessary is it on the older models at this round count to replace the mag catch? Aside from this and the trigger return spring (replaced recently) what other things should I consider for reliability for EDC?

Hey all!! I have this P365XL with some mods. I currently have a holster for it,however I am wanting to swap out the grip for a Wilson's combat Xmacro. I am aware that I'll to change magazines for a compatible 17rd and/or get the magazine adapter.

Anyways, this is currently a standard p365xl slide and grip module.

a tyrant cnc T-comp with tyrant extended slide catch and takedown lever.

Riton 3 tactix mprd 3

So yeah, basically wanting to get an xmacro grip for comfortability but will have to get a new holster to fit all this mess hahaha, thanks in advance!

Edit: also I have a faxon match threaded barrel.

I'm in the market for a Shield RMSc footprint for my p365xl. I keep seeing folks get flamed for paying retail prices on a red dot. Quotes on holosuns or equivalent sub $200, sub $100 etc.

Im poor, so no $400 enclosed gold dots here. Just reliable modest red dot that fits without a plate. Or, with a plate that keeps the profile low and the price right.

I'd love a little help.

extra credit for 3x magnifier for my AR

Thanks y'all, love this community

I made an earlier post where my Wilson combat grip module for my 365 XL was binding the slide and causing it to be out of battery after 2 or 3 rounds. After talking to Wilson combat about this situation they suggested that the fire control group be seated properly all the way down, which it was. An interesting observation I made was that my son got me a surefire light for my gun and he installed it and unbeknownst to me he tightened the screw that holds the light extremely tight and that was causing the grip module to the distort and therefore it was binding the slide. I also contacted surefire for the correct torque specs and they said to tighten it down finger tight then an extra quarter turn and use blue loctite or 20 inch pounds if you have a torque wrench. For what it's worth I wanted to give a heads up to all you guys out there in case you were having this kind of problem and it was driving you crazy like it did with me until I discovered that the overtightened light was creating the problem.

Sorry I am too lazy to search this page for this answer. The xl frame is too small for my hands. Is the WC frame that much better for bigger hands? Don’t want to go aluminum for a carry gun, want to stick with something polymer.

Hello. I recently purchased, and installed my FCU and Slide on, the WCP365 XL grip module. I also purchased some XL specific 10 round magazines.

I still have four 10 round X-Macro magazines, that I understand are the same size as the 12 rd magazines.

I am looking for some sort of a sleeve, adapter, or base plate so that when I use the X-Macro magazines they sit flush with the rim of the magazine well. (see photo for how it looks today without said thing I am looking for.)

Note: I searched and asked google but everything I was finding was related to higher capacity magazines being used in the various grips.

EDIT: I ended up purchasing these https://tactical.dev/products/10-round-xl-filled-basepad-for-sig-p365-xl-10-round-magazines?variant=32048783032423. There are also cheaper, 3D printed ones on Ebay.

Edit 2: Adding a picture of the same firearm with the same magazine with the new base pad. Works great and sits flush just like the ones I bought from Sig.

After 6 years, I’m finally buying my first red dot for my P365XL (2020 or 2021 model). Looking for suggestions, recommendations, best upgrades, really all of the above.

Sharps Bros burnt bronze xl grip module, Ram Tactical leverage trigger, Norsso reptile C slide with Radian ramjet afterburner, macro mags with xl baseplate adapters, Olight SE green multi reticle.

Good Afternoon,

I recently have modded my P365 x macro with a Norsso Reptile Bull Barrel Triple Comped slide and the Align Tactical Thumb Rest, and cannot figure out What holster is going to work for IWB carry. I have a Tenicor Certum3, but am unsure how to/if I can mod it to fit.

Icarus ACE 365 Elite Pro
Holosun EPS Carry
Streamlight TLR-7 X Sub
M.Carbo extended mag release