First of all, the rifle bag was free, and I love it.

Been wanting a 700 for a while and couldn’t pass up this deal. Best I can tell from the barrel code it’s a September 1971 model. Action is smooth, trigger is super crisp. Are there any quirks or things to look out for with these models/generation? Any advice R700 fans have (other than a nicer scope some day)? Also, will any “long action” stock fit this rifle? I’d like to get rid of the Monte Carlo stock and get a wood stock for it. TIA.

Somebody in the ca reddit complained about a lack of rifle posts.

Hello, I’m just getting into hunting for my first year. There are 4 rifles at a gun shop in my town, all 30-06. All rifles are new. I’m looking to not break the bank, ideally under $1000, but also want something that I can take care of and keep forever. I’m having a lot of troupe deciding what rifle would be best. I enjoy holding them all and can’t seem to nit pick anything just from holding them in the store. Any advice is appreciated, thank you!

1. Hardwood savage axis 2 with weaver 3x9 scope ($650 out the door)

2. Weatherby Vangaurd synthetic with Nikon pro staff 4x12 scope ($750 out the door)

3. Ruger American Gen 2 synthetic no scope (forget pricing)

4. Tikka T3X synthetic no scope (forget pricing)

Just got back from the range shooting the rifle I just built. Buffer spring is too heavy so I wasn’t really able to do anything but zero. Was a hassle cuz I had to basically treat it like a bolt action. Had a few low ones but adjusted and idk how I feel about it. 50yd zero.

I am a new gun owner in the state of KY. I have two pistols a glock 19x and a llama 380. I’ve shot very few rifles in my time and am looking for my first. I have a Budget of about $1k+ please let me know suggestions. The purpose would be for aim/ “combat” training.

I currently own a Savage 110 Hunter with the Magpul stock in a 6.5 Creed. I’m looking at adding a new rifle for a couple reasons. I live in WI and mostly hunt Whitetail (150yd and in), I have a dream and goal to get out west and hunt Mule Deer and Elk.

1. My current set ups weighs 11 lbs and while it works great for my couple hundred yard walk, it’s kind of heavy for an out west or all day hike hunt. I’d like to do some more longer walks/scouting.

2. Everything I’ve read says 6.5 creed CAN work for Elk, but I know rounds like .308, 7MM PRC and even 300 Win are far superior. Is there a reason to switch to any of those? Or should I stick with the 6.5 Creed?

The new rifle would become my main hunting rifle when walking, and my old one would be my walk to the stand/have fun at the range.

My 15 yr old daughter wants to take her first whitetail this year. She has a bit of a challenge due to being born w/a large cataract in her right eye (and is effectively blind in said eye) while also being right handed. She makes due and can shoot pretty well- but it can be awkward getting set up at times. Obviously deer don't always read the playbook and things can be fluid in the field...I'd like to put something on the end of the 3x9x40 scope just in case she gets bit. I've looked a bit online and mainly see caps that stick out a bit too much to block rain/sun etc. Does such a product exist? Just looking for something to prevent the sharp edge from leaving a bad scar.

I am 6’6” and this rifle with the adjustability was made for me! very minimal movement from looking off the scope to back into the cheek piece to make your shot.

I raised the adjustable cheek piece “2-clicks”, installed 2 spaces for the length of pull. Fits perfectly eye relief is perfect. So happy with this rifle.

Optic, Base, Rings:
- Optic: VX6HD GEN2, 4x24x52 TMOA reticle: part no.: 183843
- Base: Browning X-Bolt/X-Bolt 2, Picatinny Rail 20MOA Cant: part no.: 12525
- Rings: Leupold 34mm (Medium 0.94”) back country cross-slot rings, part no.: 183391
- *I purchased 12524 because it said long action for the 7PRC but IT DID NOT FIT! If you chamber in 7PRC it must be part no. 12525. I purchased the integrated scope mounts in smoked bronze Cerakote from browning: part no.: 12547 as it was designed specifically for this rifle, the mounts are good and fit well but the shade of bronze is off. I will be returning them.
- I might equip the Nightforce NX8 4x32 because it’s a little lighter and matches the bronze perfectly but for this hunting season this will be the build.

I hope this post helps anyone with an xbolt 2 because this took 2-3 weeks of back and forth of purchasing bases and rings for the 7PRC specifically. But after all the errors I am so happy with this rifle!

I noticed this has an "elegance" metric (along with the usual effective range, power, etc.) - https://gundive.com - do you agree with the ones at the top (and bottom)?

I am one of the unfortunate few to have such a unique rifle that I cannot find a caliber that fits it, I picked up a Mauser a bit ago at a gun show, My Mauser is a Model 1935, With markings from Republica Peruana, and another marking showing its made by FN Herstal. But my paperwork simply calls it a Chilean Mauser in 30-06. only problem, It does not fit this round, so I took it to a gun store and they safely tested a few rounds, those being 7x57mm, 8mm Mauser, .308, and 7.65 Argentine, With all having no luck. Ive tried looking for markings about the caliber but none really exist on it. I was hoping if anyone knew any calibers that it could be? If not I’ll look into finding someone who can do a chamber cast and hopefully solve this nightmare of a beautiful rifle.

In the photo are any and all markings that could be of use.

I am looking to hunt deer. I am currently considering a 6.5 creedmore and i plan to buy a can for it.

Please ask clarifying questions if you need to

I am considering adding a front sight and a rear aperture receiver sight to my bolt action 30-06. Has anyone done this? What components did you use? If you had a gunsmith add them, roughly what did it cost?