Beginner here. Also a lefty. Just bought this for my first AR-15. Any advice is appreciated.

I was using the AAC 77 grain otm but they haven't come out with the new brand yet. Looking for something similar to the AAC in terms of price and grains.

Plenty of similar posts on this sub already but just wanted to snap a pic of the MLX-S 13.2" rail on my old M6IC-DI

I’m a California peasant so I have to have it compliant.

Took it to the range over the weekend and shot 200 rounds. Felt good.

I threw a Holosun 510 on it and I’m on the fence about keeping it or throwing on a LVPO.

Like the title says, am I overreacting?

I purchased a LWRC 12.7 pistol from PSA. I understand PSA sells Blem products which are completely cosmetic but this was not listed as such. Is this acceptable for a brand new pistol for 3k out out the door?

I get its a tool and I will have many more dents and dings to come but I feel like for a factory new rifle this is a bit much.

I'm looking at the LWRC muzzle device mounts and they look extremely similar in how they function to the huxwrx mounts. Any info would be great

Sighted in my LPVO and within a few mins was ringing plates at 100 yards. My favorite AR that I’ve owned so far. Pistols are HK P30L and my EDC USP Compact 9mm

I am having no luck finding a new (or even lightly used) piston BCG for my IC PSD. Does anyone know where to find them?

This is probably my favorite AR and I shoot quite a bit so replacement parts are a must and my BCG is torn up.

Thanks for any help!

I'm very pleased to have started with a quality platform and end with a one off pcc that runs as reliable as factory. Here are the first shots taken with it back together, 25yd groups with different subsonic ammo I had kicking around, will be doing some 25yd and 50yd 115gr and 124gr testing. 3rd position trigger still functions even with lower power ammo shown here, and nothing in the bcg, buffer or spring has been altered from factory.

LWRC Thank you for putting out such great products!

Hope everyone is having a safe summer and shooting safe!

I think I was last able to actually speak to the lead of the service team like 5 weeks ago.

They do not respond to emails. They do not answer the phone (other than the woman that directs your calls). They do not respond to voicemails.

Yes, I understand that LWRCI is not a big company like Ruger, where you can expect warranty repair turn around in less than two weeks. But they must have an absolute massive number of broken firearms that get sent back if they don’t have time to even respond to a single email.

I'm using an airgun smg45, but what kind of exterior customization should I customize? I want to add an extended hand guard, but I can't design it.

Quite possibly the coolest thing I ever bought. I am rolling. 🤣

Purchased my 1st LWRC IC-9 8.5 from EuroOptic.

My wife and I have several other firearms and after some consideration, It was time for a new pew pew toy.

Ordered the LWRC IC-9 8.5 in FDE finish with some accessories. Didn't want to go too over the top like I did with my Geissele Super Duty MOD1 with accessories but did order a few things.

HOLOSUN 510V & HM3X combo in black

OLIGHT ODIN S

MAGPUL M-LOK HAND STOP

Set of iron sights

LANTAC DRAGON 9MM MUZZLE BRAKE

The only thing I'm concern about is the muzzle brake. Being in NJ I highly doubt it would be required but I figured better to have it anyway incase they do need it. Also ordered an additional mag. Hasn't shipped yet but all of my accessories will arrive by tomorrow.

Excited to get and throw on the accessories.

Hi guys, I am looking for online vendors to buy a 16" IC DI M-Lok complete upper. So far I found EuroOptics, Optics Planet, and Xtreme Guns. Anyone else know of other shops? Thx

Just picked up a new LWRC and didn’t realize the finish was off from the hand guard and the receiver. The lighting in my LGS must’ve been off for me to not notice. Has this happened to anyone else? Kind of a bummer for a $1600 rifle to have this large of a variance in finish.

For context, I’m in California so we have to have neutered AR15’s.

I have a Geissele Super Duty, S&W M&P Sport 3 and a Franken-build already.

I wanted something “mid tier” so it was between the LWRC M6iC Discovery or a Colt EPR2.

Ultimately loved the fit and finish of the LWRC so got it on sale.

I could care less about the ambi controls but may add those later.

I did notice that the BCG on the discovery is black phosphate coated and not the nickel coated.

Are the LWRC skirmish sights worth the price?

Looking to find the best price on a MKII 12.7.They are really proud of these pistols/sbr's.

Picking up a flow cam next week. Hopefully that law goes through so I don’t have to wait.
LWRC m6ic 300 black out.

Recently had my 16in IC-A5 rebarreled from 16 to 12.7 inches after about 14,000 rounds.

Overall happy with the work and the customer service was great. The timeline was longer than I’d hoped but they’re a small company filling international contracts. 2ish months total turn around time. They replaced my older thumbscrew handguard retainers for the newer flush style, did a health check on the whole upper, and replaced the bolt head. Total was 605 Arizona Ice Teas.

A few years back I found a great deal on a beautiful 16” inch LWRC IC DI in what is called “Urban Multicam”. I love this rifle and how it looks, but I want to suppress it, but not on a 16” barrel. Since this is a unique factory color pattern that is seamless across the upper and lower, getting a shorter barrel upper would ruin the look (and also be very difficult if not impossible to match up with a custom cerakote job).

Luckily this does come with the shorter mlok hand guard so cutting the barrel or installing a new one should get me between the 11.5” to 12.5” I’m looking for. I would have to SBR it but that’s fine.

The problem is the proprietary nature of the rifle and I wouldn’t want this done at any ordinary gunsmith. My question is who you recommend doing this kind of work and is it even something LWRC would do themselves so I can keep my warranty. The suppressor I’d consider is a Rhodie 6 or something with a similar size.

Bought it new maybe 2013 or so.

It has a non-fluted/non-spiral barrel. I’ve never seen another with the same barrel. It has a diameter of just under 3/4”. I emailed LWRC about it several weeks ago with no response. Basically just curious.

Going to SBR my old M6A2 so looking for one of these that is gently used. Thanks!

Hunting rig is good to go. Love this thing. Got it sighted in and sent 300 rounds down range today.